TM 55-1730-229-12
AG 320A0-OMM-000
TO 35C2-3-473-1
TM 1730-12/1
(See figure 4-42.)
a.
Remove.
(3) Use ID tags and install wires
to frequency transducer terminals (15
(1) Remove roof (paragraph 4-16).
through 18).
On each terminal, install
washer (14), wire (13), washer (12) and
nut 11).
(2) Lower control panel (paragraph
4-24 .a).
AC POWER CABLE.
(3) Open engine access door (12,
Remove all rings, watches and other
jewelry when performing maintenance
(4) Disconnect neutral cable from
on this equipment.
generator ac output terminal T6 exten-
sion bar (1, figure 4-42).
NOTE
See table 4-2, Malfunction 55 for
(5) Remove screw (7), lockwasher
test.
(8) and terminal shield (9) from left
side of ac contactor K1 (19).
12-4-42(1)
SCREW
4.
TERMINAL T6 EXTENSION BAR
1.
WASHER
5.
NUT
2.
AC NEUTRAL (N) CABLE
6.
LOCKWASHER
3.
AC and DC Power Cables (sheet 1 of 3)
Change 1
