TM 55-1730-229-12
AG 32OAO-OMM-000
TO 35C2-3-473-1
TM 1730-12/1
(1) Remove.
(See figure 4-77.)
(c) Note position of height
(a) Remove terminal screws and
adjustment nut (5) on threaded shaft of
lockwashers as required to disconnect
switch.
all wires from back of switch (4). Re-
place lockwashers and terminal screws.
(2) Install.
(See figure 4-77.)
(b) Remove nut (1), lockwasher
(a) Remove nut (1), lockwasher
(2), switch guard (3) (applicable to
(2), and keywasher (not shown) from re-
MASTER SWITCH and PNEUMATIC POWER switch
placement switch (4). The keywasher is
only), and switch (4).
not used for switch installation.
1.
NUT
4.
SWITCH, TOGGLE
2.
LOCKWASHER
HEIGHT ADJUSTMENT NUT
5.
SWITCH GUARD
3.
PANEL
6.
Control Panel Toggle Switches
