TM
55-1730-229-12
AC
320A0-OMM-000
TO
35C2-3-473-1
TM
1730-12/1
Propulsion Controls and Indicators,
and Emergency Stop Switch
Control or
Description
Indicator
Function
Propulsion Controls (figure 2-5)
Clutch Lever
Manual Lever
Located on rear axle assembly. Connects drive
(traction) motor power to rear axle. To engage
clutch, quick release pin must be removed and
clutch lever pulled toward the rear. Pushing
the lever forward and installing the quick
release pin disengages the drive.
DO NOT TOW Light
Indicator
Located on speed/direction control assembly.
Light
Illuminates when the clutch mechanism is en-
gaged.
DEAD MAN Switch
Pushbutton
Located on speed/direction control assembly.
Switch
Press-and-hold switch that completes the con-
(S2)
nection of power to the propulsion system.
Twist Grips
Speed and
Located on speed/direction control assembly.
Controls the speed and direction of AGPU
Direction
Control
by twisting the control grips In the proper
direction. To move the AGPU forward, twist
either grip as shown by arrow in figure 2-5. To
move in reverse, twist either grip in opposite
direction. To stop the AGPU, release the grip,
allowing it to return to its spring-loaded
centered (off) position, and AGPU will coast to
a stop.
Parking Brake
Pull-to-
Located on lower right front of AGPU. Sets the
rear wheel brakes. Brakes are applied when the
Lever
Release
Lever
lever is in the horizontal position and disen-
gaged when the lever is raised to the vertical
position.
Tow Bar Latch
Manual Latch
Foot operated latch. Releases tow bar from
vertical stowed position.
EMERGENCY STOP Switch
EMERGENCY STOP
Push-button
Located on front of AGPU. Deengegizes ECU and
switch (S2E)
switch (Red)
results in engine shutdown. Also shuts down
electrical, hydraulic, and/or pneumatic outputs
(does not shut down battery output).
