TM 55-1730-229-12
AG 320A0-OMM-000
TO 35C2-3-473-1
TM 1730-12/1
OUTPUT PRESSURE gauge on hydraulic
GTE EGT meter reads above 1600F
control panel does not indicate a
for more than 30 seconds.
minimum of 500 psig immediately
after engine start (unless hydrau-
GTE STARTER ON light illuminated
lic pump spacer is installed). Hy-
for more than 30 seconds.
draulic pump will be damaged if run
without hydraulic fluid pressure.
Immediately shut down engine
GTE EGT meter reads abnormally low
(5OOoF or below) with no load. ECU
Unusual noises heard.
may have a malfunction which could
result in severe damage to engine
Fuel or oil leakage observed.
when load is applied.