TM
55-1730-229-12
AG
32OAO-OMM-000
TO
35C2-3-473-1
TM
1730-12/1
12-4-17(1)
1.
COVER SCREW
CONNECTOR J1
5.
CONTROL PANEL CABLES
9.
2.
CABLE CLAMP
CONNECTOR P2
6.
SCREW
10.
3.
LOCKING COLLAR
7.
CONNECTOR J2
BATTERY CHARGER
11.
4.
CABLE CLAMP
8.
MAIN HARNESS CABLES
Figure 4-17. Battery Charger (sheet 1 of 2)
(3) Install ground wire P2120N
(6) Install cable P21B2N (16),
(26), washer (25), and nut (24) on bat-
cable P21A6N (15), and wire P2lC20N (14)
tery charger case ground terminal (27).
on J4 negative terminal (17).
(4) Install cable P32A6 (20),
(7) Install cable P22A2 (18),
washer (13) and nut (12) on J3 positive
washer (13) and nut (12) on J4 positive
terminal (21).
terminal (19).
(5) Install cable P21A6N (22),
(8) Position battery charger (11)
washer (13) and nut (12) on J3 negative
in place against bulkhead panel and
terminal (23).
fasten with four screws (10).
