TM
55-1730-229-12
AG
32OAO-OMM-000
TO
35C2-3-473-1
TM
1730-12/1
12-4-23
3.
RESISTOR, 100 OHM, 1/2W
1.
TERMINAL SCREW
ANODE TERMINAL BOARD
5.
4.
JUMPER
CATHODE TERMINAL BOARD
6.
2.
DIODE 1N5061
(a) Check nutplates on panel.
If any nutplate is missing, notify main-
tenance supervisor.
(b) If installing TB3 anode (4)
or cathode (5), install jumpers (4) at
positions indicated (4, figure 4-23).
(c) If installing ground TB (2,
figure 4-20), install jumpers (2) at
positions indicated (2, figure 4-24).
(d) Attach terminal board (2, 3,
4, or 5, figure 4-20) to panel with two
12-4-24
screws (1).
TERMINAL SCREW 3. TERMINAL BOARD
1.
JUMPER
(e) If installing TB3 (4 or 5),
2.
install electrical components to TB.
Use ID tags and figure 4-23 for refer-
Components
ence.
