TM
55-1730-229-12
AC 320A0-OMM-000
TO 35C2-3-473-1
TM 1730-12/1
12-4-19
11.
SCREW
6.
SCREW
1.
LOCKING COLLAR
COMPARTMENT TEMPERATURE
12.
2.
CONNECTOR P2
7.
ELECTRONIC CONTROL UNIT
SWITCH
8.
NUT
CONNECTOR J2
3.
13.
SOLDER LUG
9.
LOCKWASHER NUT
4.
CONNECTOR P4
14.
TRAY
10.
WASHER
5.
CONNECTOR J1
(1) Solder wires removed in step b
(3) Remove battery charger access
to terminal lugs (13) of new switch
panel (6, figure 1-1).
Either wire may be connected to
(12) .
either terminal.
(4) See figure 4-19. Remove two
nuts (8), lockwashers (9), washers (10),
(2) Install switch (12) on under-
screws (11) and switch (12).
Use
side of electrical bay subfloor.
two screws (11), washers (10), lock-
(5) Unsolder wires from switch
washers (9) and nuts (8) to fasten
terminal lugs (13).
switch to subfloor.
(6) Discard switch.
(3) Replace battery charger access
panel and control panel.
C.
Install. (See figure 4-19.)
