TM
55-1730-229-12
AG
32OAO-OMM-000
TO
35C2-3-473-1
TM
1730-12/1
c. Install.
(See figure 4-50.)
(3) Attach fuel lines (9) and
electrical connector (5) to fuel sole-
noid. Lockwire electrical connector.
(1) Apply a thin coat of anti-
seize compound MIL-L-25681 to the
threads of the bolts (6).
NOTE
(2) Install bolts (6), washers
See table 4-2, Malfunction 8 (step
(7), through fuel solenoid body (8), and
8) for test.
secure to bracket.
a. Remove.
(See figure 4-51.)
(1) Ensure that fuel tank is less
than 2/3 full.
If tank is full, drain
Do not overtighten fuel line con-
fuel into suitable container until tank
nections.
is less than 2/3 full.
12-4-51
SCREW
1.
WIRING
6.
2.
LOCK WASHER
7.
MINIATURE LIGUID LEVEL SWITCH
3.
FLAT WASHER
O-RING
8.
4.
FUEL LEVEL SENSOR WITH GASKET
9.
DRAIN VALVE
LUG (2)
5.
Fuel Level Sensors
