TM
55-1730-229-34
AG
320A0-MME-0000
TO
35C2-3-473-2
TM
1730-34/1
screw (9).
(g) Fill reservoir as described
8-8.
RESERVOIR.
(21,
reservoir
a . Remove. Remove
figure 8-7) by performing steps a.
Inspect.
b.
(1) Inspect coupling ends of re-
ducer (2), tee (12), and fittings (32
and 34) for scratches or gouges. Re-
p l a c e if damaged.
(2) Inspect tube assemblies (28)
Replace if
f o r cracks or deformation.
damaged.
( 3 ) I n s p e c t sight glass/tempera-
ture gauge (27) for cracks or leaks.
Replace if damaged.
(4) Inspect reservoir (21) inte-
a s required.
(5) Inspect coupling nut (1) and
elbow (4) for cracks and worn threads.
Replace if damaged.
(6)
Inspect
flanges
(9,
16)
for
c r a c k s . Replace if damaged.
(7) Inspect top (18) for warpage
and cleanliness of mating surfaces to
reservoir (2).
(8) Inspect spacer (23) of temp
Figure 8-7. Reservoir
gauge for burrs, scratches, and corro-
s i o n . Replace if damaged.
(d) Insert valve (14) into hole
(9) Inspect baffle (29) for dam-
i n manifold.
age.
(e) Install mounting flange
(13), pin (11), and six screws (12).
c.
Repair.
8-12