TM 55-1730-229-34
A 320A0-MME-000
TO 35 C2-3-473-2
TM 1730-34/1
Compressor Inlet Ducts and Hourmeter
Table 9-4.
Bracket Inspection/Cheek Procedures
Item
No.
Nomenclature
Inspect/Check
Requirements
4
Inlet Screen
No cracks or damage allowed.
Visually check screen for
cracks and damage.
No cracks allowed.
Visually cheek bracket for
Bracket
9,12,
15,32
cracks.
No damage to mount brackets
Visually check for damaged
Upper Duct
33
allowed.
mount brackets.
No cracks in duct allowed.
Visually check for cracks in
duct.
No loose rivets or damaged
Visually check for loose
Lower Duct
33
nut plates allowed.
rivets (39) and damaged
nut plates (40).
Seal shall be secure, no
Visually check seal (37) for
security and deterioration.
deterioration allowed.
No cracks or damage allowed.
Visually check for cracks
in duct (34). Check drain
fitting for damage.
No loose rivets allowed.
Visually check for loose
rivets (35).
All data on pages 9-24 through 9-37, including Figures 9-10 through 9-18 and
Table 9-5 are deleted.
Change 1
9.23/(9-24 blank)
