TM 5-1730-245-14
5.8 HYDRAULIC CONTROL MANIFOLD - REPLACE.
THIS TASK CONSISTS OF:
a. Removal
b Installation
INITIAL SETUP
Tools:
Equipment Condition:
Toolkit, General Mechanics (item 5, Section III, Appendix B).
Shop Equipment Automotive Maintenance and Repair:
Organizational Maintenance, Common No. 1, less
Hydraulic fluid tank drained. Refer to para. 4.3
1) Disconnect the seven hydraulic lines (1) and two hoses (7) from the hydraulic control manifold (2).
2) Remove and retain relief valves (3)
3) Remove the screws (5) and lockwashers (6) holding hydraulic control manifold (2) to mounting bracket
(4).
4) Remove hydraulic control manifold (2) from mounting bracket (4).
1) Attach hydraulic control manifold (2) to its mounting bracket (4) and secure with screws (5) and
2) Install relief valves (3)
3) Connect the seven hydraulic lines (1) and the two hoses (7) to hydraulic control manifold (2).
4) Fill the hydraulic fluid tank Refer to paragraph 4 3
Figure 5-5. Hydraulic Control Manifold.
5-10