TM 11-6130-243-35-1
c. Procedure.
(6) Power cable (as fabricated).
(7) Mating connector (FSN 5935-236-
Tests at 220-Volt Input
4640).
a. Test Equipment and Materials.
b. Test Connections and Conditions. Connect
(1) Voltmeter, Meter ME-30 (`k )/U.
the equipment as shown in figure 31. (This
test is written for operation of the power sup-
plv at 220 volts at. ) Do not connect the load
` -
(4) Low Voltage Circuit Tester TV100.
and the TV100 to the power supply until in-
structed to do so in the procedure given in c
below.
watt; 3 required.
c. Procedure.
